LED light; LED lighting

You are currently browsing articles tagged LED light; LED lighting.

One more time – buying an LED light based ONLY on the number of watts (W) is a BIG mistake. Why?

Well incandescent lights, like a 60 watt bulb, put out a fairly constant amount of lumens per watt of electricity used – no matter what the brand. Simply stated, look at lumens as being the measure of light output of a light source. The more lumens, the brighter the light. So buying a 60 watt bulb from brand X or Y or Z will not result in a dramatically different lumen output and you can have a high degree of confidence buying by the number of watts.

Not so for LED lighting. Different manufacturers (and there are hundreds) produce lights that have very different “lumen per watt” outputs. Using older technology, the LEDs may only reach outputs of 50 lumens per watt. So buying a 3W LED light will give you about 150 lumens of light.

More recent technology offers over 100 lumens per watt and so a good 3W light can offer 300 lumens of light output.

That is the difference between a light level that allows reading and one that will cause eye strain.

So do not buy a light that does not have the “lumenous flux” rating clearly stated. If you don’t, you’ll be playing Russian roulette when you turn it on – not knowing what you are going to get!

What you will need to know is the lumen output of each of your current lights. For example, a 60 W incandescent bulb puts out around 650-750 lumens. So you need an LED bulb that can match this.

Look for the lumen output, not the wattage!

LED light bulb

LED light bulb that replaces incandescent light bulb

 

 

 

 

 

 

 

 

 

Article by Steve Giddings

 

 

 

 

 

 

 

 

Tags: , , , ,

By 2020, 8 out of 10 lights you see will be LED lights. The lighting revolution is no different to the communication and information technology revolutions that have driven our development.

So what are the 10 great reasons to make the change?

1. Low efficiency

Do you really switch on your lights to heat up the room? No! But 85% of the electricity going into your incandescent lightbulb is emitted as… heat! 60 Watts of energy ends up heating up your room… not great!

2. Longer life

Incandescent lights last for 1000 hours… LED lights last for 30000-50000 hours. A big difference…

3. No UV radiation

Yes, UV radiation is emitted by our current lighting. You are not about to get a beach tan from your lighting, but UV light is an issue, and it will impact fabrics and paintings. LED lights have no UV emissions.

4. Mercury..

Fluorescent lights contain mercury! LED lights contain none. Your choice!

5. No glass

LED lights are made of plastic and aluminum…no glass. So there is no safety issue and no glass that can shatter and cut.

6. Color rendering index

How “real” are the colors under different light sources? Is pink really pink? Under fluorescent light, you may see about 65% of the “real” color. Incandescent lights are better at around 90%, but LEDs come in across the board at around 80-90%. So similar for LED replacements of incandescent lights but if you replace fluorescent lights, you’ll have a great reason to change your lights.

7. Power efficiency

We’ve talked about lumen efficiency per watt of electricity. But what about power efficiency. LED lights use from 2-10 times less power for the same light output. Incandescents  put out less than 15 lumens per watt (consider lumens as a measure of light output). Enter the LED light – 7 Watts at 100 lumens per watt. 7 Watts of electricity will cost you a lot less than 60 Watts! That’s a great reason to replace your lights with LED lights!

8. Directional light

LED lights emit light where you point them…not behind them like an incandescent light. Direct the light where you need it…who needs the ceiling lit when you are more interested in the light on your dining table?

9. Color

You can literally make your LED lights in any color – some even change color with a remote control. So mood lighting is possible and not only can you dim them, but change color as you need to.

10. Finally, safety.

LED lights run on 12 to 24 volts. So a broken bulb will not kill you! A pretty good reason to change your lights to LED lights!

So there are 10 reasons… why not contact LED Lighting Solutions to advise on your LED light replacements.

 

Tags: , , , , , ,

Y.F. Yeh, Everlight ‘s Chairman, has stated that led light bulbs will drop to less than US$10 in the second half of 2012.

This will come on the back of a soft first half of 2012 and will be driven by stronger demand after June 2012.

LED lights are gaining popularity as consumers begin to understand the energy saving potential and manufacturers hit higher lumen/watt figures and quality improves. Quality improvements are the key to increasing confidence in the industry, where over promising and under delivery are common. Hopefully, softer demand in H1 2012 will drive fly by night companies out of business and will leave more genuine suppliers like LED Lighting Solutions in a better position to advise customers and provide high quality lighting.

All in, this bodes well for the LED lighting industry and more importantly, for the consumer.

Tags: , , , , , ,

LED lights? What is the fuss all about you may well be asking. “LED ???” … what the heck does that mean? Here’s a quick, light (sorry!) look at this thing called the “LED light”.

An example of an LED light used to replace standard lighting bulbs

An example of an LED light that replaces a 60W incandescent light bulb

First, let’s begin with the meaning of LED. LED stands for Light Emitting Diode… and even a non-rocket scientist (like me!) can work out that the main thing to note is that it “emits light” . It does this when a power source (like a battery) is applied to its two input terminals and it does so because the boffins have worked out how to get the now powered up little electrons to give off light as they move through the material that makes up this “diode” thing. They have been around for years…but until recently they have been used only as “indicating” lights (e.g. is the TV, cellphone, kettle, hifi etc  on or off) and not for illumination. So they are that little colored plastic light in your hi-fi, hair dryer etc that comes on when you turn the power on.

The electronics of an LED are not important here, just that you need to know that when you attach a power source like a battery or electricity, the result is an electron flow that results in light being emitted.

The catalyst for their development into lights was the realisation that they use very little power to create light. Take your cellphone. That little light that flashes to tell you that it is “on” is not about to drain your battery in a hurry. So some clever people thought “hey, if this thing uses so little power, what about making a light bulb out of them?”.

Problem. Until recently, the amount of light that they could generate was very, very small. So you’d have to connect a room full of them together to get anything near a light that could replace the standard globe above your head.

But, along came even more clever folk who were able to increase the lumen output (call that a measure of light given off) from 3 lumen per watt of electricity to 30 lumens…then 50 lumens and now we are at 100 lumens per watt in commercial applications. I hear the “even more clever” people have prototypes at over 300 lumens per watt. So watt you say!

Well here’s the buzz – a standard 60W incandescent light (which most of us use for lighting) gives off about 700-800 lumens… so that is just 13 lumens per watt. Much of the electricity goes to generating heat in the incandescent bulb…and anyone who has tried to change an incandescent bulb that has been on for a while…will know that! Ouch!

So if we can get the same amount of light that a 60W bulb (60 x 13 lumens/watt= 800 lumens)  puts out with an LED light that requires only 8W (8 x 100 lumens/watt) of electricity, we stand to radically reduce the electricity consumption of that light. That is the beauty of the LED light.

So less power = less cost for the consumer and less carbon dioxide emissions from that power station down the road because only 1/8th of the electricity needs to be generated from coal. Very “green” indeed!

Brilliant! So why are we not ripping out our globes (after they have cooled…of course!) and fitting LED globes?  Well, this is a new technology and at present, the cost of manufacturing the LED lights is still higher than most consumers are willing, or in today’s times…”able…” to spend. There is …um…light on the horizon though, as performance is increasing and costs are coming down. Mainstreaming of the technology will occur in the next 3 years I reckon.

Now when you look at an LED light, you will notice that the base looks quite “heavy”. The reason for this is that the electronics that help make the light work, can generate heat. The problem here is that the more heat that is generated, the more likely the electronics will eventually pack up. So those clever folk in the R&D labs have developed aluminium heat sinks, or ways to get the heat away from the electronics. The aluminium carries the heat away, and because it has a large surface area with all those fins or folds, it allows heat to move off into the air around it. That is why the base looks “heavy”.

That said, LED lights convert 80-95%  of the power into light so they actually don’t get very hot at all. This saves further electricity usage in that air conditioners are not required to cool down the warm air that the incandescent lights are creating (not an advantage in Alaska maybe…but anywhere else it could be quite a saving!).

So there we have it. A new technology that makes low cost lighting possible; reduces carbon emissions and has some other advantages (like they don’t give of ultraviolet light) that add to the positives.

The negatives are that as a disruptive technology, not all products on the market will work as promised and quality varies significantly from manufacturer to manufacturer. I replaced a 50 W halogen spotlight with an LED and ended up staggering around the room trying not to bump into anything! Not at all the equivalent lumen output that the manufacturer had promised, and had I not known better, I may have rejected LED lighting as a “con” and become cynical about this new “ponzi” scheme! Fortunately, I have some really great lights that have adequately replaced the power guzzlers… ahh…that reminds me…the other BIG advantage is that LED lights can last for 50000 hours before they become dim (gradually over time they do go dim… but they don’t  ”burn out” every 1000 hours as do incandescent lights do ). Now if you just use your bedsite light for an hour a day… it means that you’ll die before your 50000 hour LED light will! Imagine leaving your bedside light to your loved ones in your Will..!

So all in all, a technology with a very promising potential. Watch this space in the years ahead… could be just as wonderful and as useful as cell phone technology. The difference is that LED lights won’t be helping your work to follow you everywhere you go! ….

Was this useful? Send comments or post questions on my Facebook page at  http://www.facebook.com/pages/LED-Lighting-Solutions-Africa/314497688585093

By Steve Giddings

Tags: , , , , ,